Review of Impurity Removal Methods in Steel Scrap Recycling

Citation: Gao, Zhijiang; Sridhar, S.; Erik Spiller, D.; Taylor, Patrick R., ”Review of Impurity Removal Methods in Steel Scrap Recycling”, Journal of Solid Waste Technology & Management, Nov2021, Vol. 47 Issue 4, p732-745.

Authors: Gao, Z. [Colorado School of Mines, Golden, CO (United States)], Sridhar, S. [Colorado School of Mines, Golden, CO (United States)], Spiller, D. E. [Colorado School of Mines, Golden, CO (United States)], and Taylor, P.R. [Colorado School of Mines, Golden, CO (United States)]

Publication Info: Journal of Solid Waste Technology and Management

ISSN: 1088-1697

Material flows and GHG emissions from housing stock evolution in US counties

Citation: Berrill, P., & Hertwich, E. G. (2021). Correction: Material flows and GHG emissions from housing stock evolution in US counties, 2020–60. Buildings and Cities, 2(1), 797–799. 22 Sep 2021. DOI: http://doi.org/10.5334/bc.150

Authors: Berrill, P. and Hertwich, E. G

Publication Info: Buildings & Cities

DOI: doi.org/10.5334/bc.150

Material efficiency and climate change mitigation of passenger vehicles

Citation: Wolfram, P., Q. Tu, N. Heeren, S. Pauliuk, and E. G. Hertwich. 2020. Material efficiency and climate change mitigation of passenger vehicles. Journal of Industrial Ecology. https://onlinelibrary.wiley.com/doi/abs/10.1111/jiec.13067 (published September 17, 2020).

Authors: Wolfram, P., Q. Tu, N. Heeren, S. Pauliuk, and E. G. Hertwich

Publication Info: Journal of Industrial Ecology

DOI: 10.1111/jiec.13067

Reliability-Informed Life Cycle Warranty Cost and Life Cycle Analysis of Newly Manufactured and Remanufactured Units

Citation: Li M., Nemani V.P., Liu J., Lee M.A., Ahmed N., Kremer G.E., and Hu C., “Reliability-Informed Life Cycle Warranty Cost and Life Cycle Analysis of Newly Manufactured and Remanufactured Units,” , Journal of Mechanical Design, November 2021.​

Authors: Martey, S.; Addison, B.; Wilson, A. N.; Tan, B.; Yu, J.; Dorgan, J. R.; Sobkowicz, M. J.

Publication Info: Journal of Mechanical Design, Volume 143, Issue 11, November 2021

DOI: 10.1115/1.4050741

Determination of Metallic and Polymeric Contents in Electronic Waste Materials and Evaluation of their Hydrometallurgical Recovery Potential

Citation: Murali, A., Sarswat, P.K., Benedict, J. et al. Determination of metallic and polymeric contents in electronic waste materials and evaluation of their hydrometallurgical recovery potential. Int. J. Environ. Sci. Technol. (2021). doi.org/10.1007/s13762-021-03285-3

Authors: Martey, S.; Addison, B.; Wilson, A. N.; Tan, B.; Yu, J.; Dorgan, J. R.; Sobkowicz, M. J.

Publication Info: International Journal of Environmental Science and Technology

DOI: 10.1007/s13762-021-03285-3

Hybrid Chemo‐Mechanical Plastics Recycling: Solvent‐free, High‐speed Reactive Extrusion of Low‐Density Polyethylene

Citation: Martey, S.; Addison, B.; Wilson, A. N.; Tan, B.; Yu, J.; Dorgan, J. R.; Sobkowicz, M. J. Hybrid Chemo‐Mechanical Plastics Recycling: Solvent‐free, High‐speed Reactive Extrusion of Low‐Density Polyethylene. ChemSusChem 2021, cssc.202100968.

Authors: Martey, S.; Addison, B.; Wilson, A. N.; Tan, B.; Yu, J.; Dorgan, J. R.; Sobkowicz, M. J.

Publication Info: ChemSusChem 2021 cssc.202100968

DOI: 10.1002/cssc.202100968

Lifecycle Assessment of High-Density Polyethylene Plastic Waste Recycling

Citation: Gandhi, Neeti, Farfaras, Nicholas, Wang, Nien-Hwa Linda, and Chen, Wan-Ting (Grace), submitted an article "Lifecycle Assessment of Plastic Waste Management Methods" to the Journal of Renewable Materials.

Authors: N. Gandhi, N. Farfaras, N. Wang, and W. Chen

Publication Info: Journal of Renewable Materials, April 2021

DOI: 10.32604/jrm.2021.015529

Systems Analysis Approach to PET and Olefin Plastics Supply Chains in the Circular Economy: A Review of Datasets and Models

Citation: Chaudhari, U., Lin, Y., Thompson, V., Handler, R, Pearce, J., Caneba, G., Muhuri, P., Watkins, D., Shonnard, D., 2020, Systems Analysis Approach to PET and Olefin Plastics Supply Chains in the Circular Economy: A Review of Datasets and Models, ACS Sustainable Chemistry & Engineering, Accepted April 2021

Authors: Chaudhari, U., Lin, Y., Thompson, V., Handler, R, Pearce, J., Caneba, G., Muhuri, P., Watkins, D., Shonnard, D.

Publication Info: ACS Sustainable Chemistry & Engineering

DOI: 10.1021/acssuschemeng.0c08622

In-situ Monitoring of Direct Energy Deposition via Structured Light System and its Application in Remanufacturing Industry

Citation: Xiao Zhang, Weijun Shen, Vignesh Suresh, Jakob Hamilton, Li-Hsin Yeh, Xuepeng Jiang, Zhan Zhang, Qing Li, Beiwen Li, Iris V. Rivero, Hantang Qin, “In-situ monitoring of Direct Energy Deposition via Structured Light System and its application in remanufacturing industry”, won the M&D Best Track Paper Award for the 2021 Institute of Industrial and Systems Engineers (IISE) Annual Conference & Expo

Authors: X. Zhang, W. Shen, V. Suresh, J. Hamilton, L-H Yeh, X. Jiang, Z. Zhang, Q. Li, B. Li, I. V. Rivero, H. Qin

Publication Info: The International Journal of Advanced Manufacturing Technology, February 2021

DOI: 10.21203/rs.3.rs-278338/v1

Note: Won the Institute of Industrial & Systems Engineers Manufacturing & Design Division 2021 M&D Best Track Paper Award by an Ad-Hoc Award Committee of the Manufacturing and Design Division for their publication and will be recognized at the 2021 IISE Annual Virtual Conference & Expo

United States plastics: Large flows, short lifetimes, and negligible recycling

Citation: Di, J., B. K. Reck, A. Miatto, and T. E. Graedel. 2021. United States plastics: Large flows, short lifetimes, and negligible recycling. Resources, Conservation and Recycling 167: 105440. 25 January 2021. DOI: https://doi.org/10.1016/j.resconrec.2021.105440

Authors: Di, J. [Tsinghua University, Beijing (China) and Yale University, New Haven, CT (United States)], Reck, B. K. [Yale University, New Haven, CT (United States)], Miatto, A. [Yale University, New Haven, CT (United States)], Graedel, T. E. [Yale University, New Haven, CT (United States)]

Publication Info: Resources, Conservation and Recycling

DOI: 10.1016/j.resconrec.2021.105440

Applying Improved Optical Recognition with Machine Learning on Sorting Cu Impurities in Steel Scrap

Citation: Gao, Z. , Sridhar, S. , Spiller, D. E. , and Taylor, P.R., "Applying Improved Optical Recognition with Machine Learning on Sorting Cu Impurities in Steel Scrap", published paper in Journal of Sustainable Metallurgy, December 7, 2020 online.

Authors: Gao, Z. [Colorado School of Mines, Golden, CO (United States)], Sridhar, S. [Colorado School of Mines, Golden, CO (United States)], Spiller, D. E. [Colorado School of Mines, Golden, CO (United States)], and Taylor, P.R. [Colorado School of Mines, Golden, CO (United States)]

Publication Info: Journal of Sustainable Metallurgy

DOI: 10.1007/s40831-020-00300-8

ISSN: 2199-3823

Correlation Approach for Quality Assurance of Additive Manufactured Parts Based on Optical Metrology

Citation: X. Zhang, Y. Zheng, S. Wang, Q. Li, B. Li, and H. Qin, “Correlation Approach for 3D Surface Measurement Data of Additive Manufactured Parts Based on Optical Metrology.” Journal of Manufacturing Processes, 53 (2020): 310-317. https://doi.org/10.1016/j.jmapro.2020.02.037

Authors: Xiao Zhang, Yi Zheng, Vignesh Suresh, Shaodong Wang, Qing Li, Beiwen Li, Hantang Qin

Publication Info: Journal of Manufacturing Processes 53 (2020) 310-317

DOI: 10.1016/j.jmapro.2020.02.037

Similarity Evaluation of Topography Measurement Results by Different Optical Metrology Technologies for Additive Manufactured Parts

Citation: Y. Zheng, X. Zhang, S. Wang, Q. Li, H. Qin*, and B. Li*, “Similarity Evaluation of Topography Measurement Results by Different Optical Metrology Technologies for Additive Manufactured Parts”, Optics and Lasers in Engineering 126 (2020): 105920. https://doi.org/10.1016/j.optlaseng.2019.105920

Authors: Yi Zheng [Iowa State University, Ames, IA (United States)], Xiao Zhang [Iowa State University, Ames, IA (United States)], Shaodong Wang [Iowa State University, Ames, IA (United States)], Qing Li [Iowa State University, Ames, IA (United States)], Hantang Qin [Iowa State University, Ames, IA (United States)], Beiwen Li [Iowa State University, Ames, IA (United States)]

Publication Info: Optics and Lasers in Engineering 126 (2020) 105920

DOI: 10.1016/j.optlaseng.2019.105920

Finite-Difference Simulation of Eddy Currents in Nonmagnetic Sheets Via Electric Vector Potential

Citation: Shonnard, D.R., Tipaldo, E., Thompson, V., Pearce, J., Caneba, G., Handler, R.M., 2019, "Systems analysis for PET and olefin polymers in a circular economy", Procedia CIRP, 80, 602-606, 26th CIRP Life Cycle Engineering (LCE) Conference

Authors: Nagel, J.R. [University of Utah, Salt Lake City, UT (United States)]

Publication Info: IEEE Transactions on Magnetics, Vol. 55, No. 12 (2019)

DOI: 10.1109/TMAG.2019.2940204

ISSN: 0018-9464

In-situ Monitoring of Electrohydrodynamic Inkjet Printing via Scalar Diffraction for Printed Droplets

Citation:X. Zhang, B. Lies, H. Lyu, and H. Qin*, “In-situ monitoring of electrohydrodynamic inkjet printing via scalar diffraction for printed droplets”, Journal of Manufacturing, Systems, 53 (2019): 1-10. https://doi.org/10.1016/j.jmsy.2019.08.001

Authors: Xiao Zhang, Benjamin Lies, Hao Lyu, Hantang Qin

Publication Info: Journal of Manufacturing Systems, 53 (2019): 1-10

DOI: 10.1016/j.jmsy.2019.08.001