Citation: J.Krantz et al. `Pressure-controlled injection molding of recycled polyolefins` SPE ANTEC-2022, June 16,2022.
Authors: Joshua Krantz, Peng Gao, Zarek Nieduzak, Elizabeth Kazmer, Olvia Ferki, Margaret Sobkowicz-Klein, Davide Masato (University of Massachusetts Lowell, Lowell, MA)
Publication Info: SPE ANTEC® 2022, Charlotte, NC, scheduled for June 14-15, 2022
Citation: Identification and Characterization of Organic Contaminants in Recycled Paper presented at TAPPICon2022 (May 2022).
Publication Info: TAPPI Paper Recycling Committee Meeting May 2022
Citation: P. Gao, J. Krantz, O. Ferkl, M. Sobkowicz-Kline, D. Masato. "Effect of velocity-controlled and pressure-controlled filling on the morphology evolution of semi-crystalline injection molded parts" presented at 37th International Conference of the Polymer Processing Society *PPS-37) April 11-15, 2022, Fukuoka, Japan (https://www.pps-37.org/).
Authors: P. Gao, J. Krantz, O. Ferkl, M. Sobkowicz-Kline, D. Masato
Publication Info: Conference Paper
Citation: Love, J., Walluk, M., and Reis, H., (2022), "Nonlinear ultrasonic assessment of damage in cast iron components," Health Monitoring of Structural and Biological Systems XYI (SSN08), SPIE Smart Structures/NDE 2022, 6 - 10 March 2022, Long Beach, California.
Authors: X. Zhang, W. Shen, V. Suresh, J. Hamilton, L-H Yeh, X. Jiang, Z. Zhang, Q. Li, B. Li, I. V. Rivero, H. Qin
Conference Info: SPIE Smart Structures, 6-9 March 2022, Long Beach, California, United States
Citation: Runsewe, T., Bafail, O., & Celik, N. (2020). Performance analysis of waste collection programs in material recovery facilities. In L. Cromarty, R. Shirwaiker, & P. Wang (Eds.), Proceedings of the 2020 IISE Annual Conference (pp. 1401-1406). (Proceedings of the 2020 IISE Annual Conference). Institute of Industrial and Systems Engineers, IISE.
Authors: Runsewe, T., Bafail, O., & Celik, N. (2020)
Publication Info: IISE Annual Conference, New Orleans, Louisiana, Oct 31 – Nov 03, 2020 [Conference held virtually due to Covid-19]
Citation: Siddhesh Chaudhari, Clinton Switzer, Mohamadreza Youssefi Azarfam, Anuj Maheshwari, Frank D. Blum, Jay Hanan, Sudheer Bandla, Ranji Vaidyanathan, "Compression molding for assessing sustainable polymer composites using post-consumer polyester carpet and recycled polyester from bottling waste streams", presented at CAMX 2021, Dallas TX, October 19-21-2021
Authors: Siddhesh Chaudhari, Clinton Switzer, Mohamadreza Youssefi Azarfam, Anuj Maheshwari, Frank D. Blum, Jay Hanan, Sudheer Bandla, Ranji Vaidyanathan
Conference Info: The Composites and Advanced Materials Expo, Oct 19-21, 2021 Dallas TX
Citation: "Surface Extraction from Micro-Computed Tomography Data for Additive Manufacturing" at NAMRI | SME NAMRC 49 Conference Jun 23 Weijun Shen [Iowa State University, Ames, IA (United States)], Xiao Zhang [Iowa State University, Ames, IA (United States)], Xuepeng Jiang [Iowa State University, Ames, IA (United States)], Li-Hsin Yeh [Iowa State University, Ames, IA (United States)], Zhan Zhang [Iowa State University, Ames, IA (United States)], Qing Li [Iowa State University, Ames, IA (United States)], Beiwen Li [Iowa State University, Ames, IA (United States)], Hantang Qin [Iowa State University, Ames, IA (United States)]
Authors: Weijun Shen [Iowa State University, Ames, IA (United States)], Xiao Zhang [Iowa State University, Ames, IA (United States)], Xuepeng Jiang [Iowa State University, Ames, IA (United States)], Li-Hsin Yeh [Iowa State University, Ames, IA (United States)], Zhan Zhang [Iowa State University, Ames, IA (United States)], Qing Li [Iowa State University, Ames, IA (United States)], Beiwen Li [Iowa State University, Ames, IA (United States)], Hantang Qin [Iowa State University, Ames, IA (United States)]
Conference Info: 49th SME North American Manufacturing Research Conference, NAMRC 49, Ohio, USA June 21-25, 2021
Citation: Li, Meng; Liu, Jinqiang; Nemani, Venkat Pavan; Ahmed, Navaid; Kremer, Gül E.; and Hu, Chao, "Reliability-Informed Life-Cycle Warranty Cost Analysis: A Case Study on a Transmission in Agricultural Equipment" (2020). Industrial and Manufacturing Systems Engineering Conference Proceedings and Posters. 204. https://lib.dr.iastate.edu/imse_conf/204
Authors: Li M., Liu M., Nemani V.P., Ahmed N., Kremer G.E., and Hu C.
Publication Info: 25th Design for Manufacturing and the Life Cycle Conference (DFMLC)
DOI: 10.1115/DETC2020-22710
Citation: Shonnard, D.R. published an invited manuscript for the online site Recycling Today based on the REMADE webinar organized with David Mancuso on August 7, 2019 http://www.recyclingtoday.com/article/exploring-a-circular-economy-for-plastics/
Authors: Shonnard, D.R.
Publication Info: Online site Recycling Today
Citation: Vignesh Suresh, Yi Zheng, Xiao Zhang, Shaodong Wang, Hantang Qin, Qing Li, Beiwen Li, "Similarity evaluation of 3D topological measurement results using statistical methods (Rising Researcher)," Proc. SPIE 11397, Dimensional Optical Metrology and Inspection for Practical Applications IX, 113970A (21 April 2020); doi: 10.1117/12.2557627
Authors: Vignesh Suresh (Department of Mechanical Engineering, Iowa State University), Yi Zheng (Department of Mechanical Engineering, Iowa State University), Xiao Zhang (Department of Industrial and Manufacturing Systems Engineering, Iowa State University), Shaodong Wang (Department of Industrial and Manufacturing Systems Engineering, Iowa State University), Hantang Qin (Department of Industrial and Manufacturing Systems Engineering, Iowa State University), Qing Li (Department of Industrial and Manufacturing Systems Engineering, Iowa State University), Beiwen Li (Department of Mechanical Engineering, Iowa State University)
Publication Info: SPIE Defense + Commercial Sensing, 2020 (Digital Forum)
DOI: 10.1117/12.2557627
