Economic and environmental feasibility of recycling flexible plastic packaging from single stream collection

Citation:

Yingqian Lin, Michael H. Severson, Ruby T. Nguyen, Anne Johnson, Christopher King, Beth Coddington, Hongqiang Hu, Brennan Madden, “Economic and environmental feasibility of recycling flexible plastic packaging from single stream collection”, Resources, Conservation and Recycling, Volume 192, 2023, 106908, http://dx.doi.org/10.2139/ssrn.4186807

Authors: Corresponding Author: Dr. Yingqian Lin; Co-Authors: Michael Severson, M.S.; Ruby Thuy Nguyen, Ph.D.; Anne Johnson, M.S.; Christopher King, M.S.; Beth Coddington, B.A.; Hongqiang Hu, Ph.D.; Brennan Madden, M.S.

Journal Info: Resources, Conservation & Recycling

DOI: http://dx.doi.org/10.2139/ssrn.4186807

Thermomechanical Properties of Crosslinked EVA: A Holistic Approach

Citation: Kimberly Miller McLoughlin, Amin Jamei Oskouei, Michelle K. Sing, Alireza Bandegi, Sarah Mitchell, Jayme Kennedy, Thomas G. Gray, and Ica Manas-Zloczower. “Thermomechanical Properties of Crosslinked EVA: A Holistic Approach.” ACS Applied Polymer Materials 2023 5 (2), 1430-1439. DOI: 10.1021/acsapm.2c01928

Authors: McLoughlin, K.M., Oskouei, A, Sing, M.K., Bandegi, A., Mitchell, S., Kennedy, J., Gray, T. G., Manas-Zloczower, I.

Journal Info: Journal of Applied Polymer Materials

DOI: 10.1021/acsapm.2c01928

Identification and Characterization of Sticky Contaminants in Multiple Recycled Paper Grades

Citation: Wang, Y., Marcello, C., Sawant, N., Salam, A., Abubakr, S., Qi, D., & Li, K. (2022). “Identification and Characterization of Sticky Contaminants in Multiple Recycled Paper Grades”, Cellulose, 1-14. https://doi.org/10.1007/s10570-022-05006-6

Authors: Wang, Y., Marcello, C., Sawant, N., Salam, A., Abubakr, S., Qi, D., & Li, K.

Publication Info: Cellulose

DOI: 10.1007/s10570-022-05006-6

Economic analysis of precious metal recovery from electronic waste through gas-assisted microflow extraction

Citation: Deng S., Xiao Z., Zhang W., Noble A., Das S., Yih Y., Sutherland J.W., 2023. Economic analysis of precious metal recovery from electronic waste through gas-assisted microflow extraction. Resources, Conservation & Recycling, 190, 106810.

Authors: Deng S., Xiao Z., Zhang W., Noble A., Das S., Yih Y., Sutherland J.W.

Journal Info: Resources, Conservation & Recycling

A New Method of Studying the Fundamental Mechanisms Involved in Pigment Liberation from Recycle Papers

Citation: Huang, K., Strickland, K., Noble, A., Yoon, R. H., & Basilio, C., “A New Method of Studying the Fundamental Mechanisms Involved in Pigment Liberation from Recycle Papers,” TAPPI Journal October 2022

Authors: Kaiwu Huang, Kris Strickland, Aaron Noble, and Roe-Hoan Yoon; Cesar Basilio

Publication Info: TAPPI Journal

Effect of Progressive Deinking and Reprinting on Inkjet-Printed Paper

Citation: Sonmez, S., Sood, S., Li, K., Salam, A., Fleming III, P. D., Pekarovicova, A., & Wu, Q., (2022). “Effect of Progressive Deinking and Reprinting on Inkjet-Printed Paper”, Nordic Pulp & Paper Research Journal, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1515/npprj-2022-0076

Authors: Sonmez, S., Sood, S., Li, K., Salam, A., Fleming III, P. D., Pekarovicova, A., & Wu, Q.

Publication Info: Nordic Pulp & Paper Research Journal

DOI: https://doi.org/10.1515/npprj-2022-0076

Material Flow Analysis and LCA of Polyethylene Terephthalate (PET) and Polyolefin Plastics Supply Chains in the United States

Citation: Chaudhari, U., Johnson, A., Reck, B., Handler, R., Thompson, V., Hartley, D., Young, W., Peralta, A., Watkins, D. Shonnard, D.R., Material Flow Analysis and LCA of Polyethylene Terephthalate (PET) and Polyolefin Plastics Supply Chains in the United States, ACS Sustainable Chemistry & Engineering, 10, 39, 13145–13155, https://doi.org/10.1021/acssuschemeng.2c04004

Authors: Chaudhari, U., Johnson, A., Reck, B., Handler, R., Thompson, V., Hartley, D., Young, W., Peralta, A., Watkins, D. Shonnard, D.R.

Journal Info: ACS Sustainable Chemistry and Engineering

DOI: 10.1021/acssuschemeng.2c04004

Property-Structure-Process Relationships in Dissimilar Material Repair with Directed Energy Deposition: Repairing Gray Cast Iron using Stainless Steel 316L

Citation:
Hamilton, Jakob D., Sorondo, Samantha, Greeley, Andrew, Zhang, Xiao, Cormier, Denis, Li, Beiwen, Qin, Hantang, and Rivero, Iris V. Property-structure-process relationships in dissimilar material repair with directed energy deposition: Repairing gray cast iron using stainless steel 316L. United States: N. p., 2022.

DOI: 10.1016/j.jmapro.2022.06.015.

Authors: Hamilton, Jakob D., Sorondo, Samantha, Greeley, Andrew, Zhang, Xiao, Cormier, Denis, Li, Beiwen, Qin, Hantang, and Rivero, Iris V.

Publication Info: Journal of Manufacturing Processes

Bioengineered Copper Recovery from Electronic Wastes to Increase Recycling and Reduce Environmental Impact

Citation: Arun Murali, Matthew J Plummer, Adam E Shine, Michael L Free, Prashant K Sarswat, “Optimized bioengineered copper recovery from electronic wastes to increase recycling and reduce environmental impact”. Journal of Hazardous Materials Advances, Volume 5, 2022,100031, ISSN 2772-4166, doi: 10.1016/j.hazadv.2021.100031

Authors: Murali, A., Sarswat, P. K., Plummer, M. J., Shine, A. E., Free, M. L.

Article Info: Journal of Material Cycles and Waste Management

Catalytic thermochemical conversion of plastic waste into fuels, chemicals, and value-added materials: A critical review and outlooks

Citation: Yang, Ren‐Xuan, Jan, Kalsoom, Chen, Ching‐Tien, Chen, Wan‐Ting, and Wu, Kevin C. ‐W. Thermochemical Conversion of Plastic Waste into Fuels, Chemicals, and Value‐Added Materials: A Critical Review and Outlooks. Germany: N. p., 2022. Web. doi: 10.1002/cssc.202200171

Authors: Ren-Xuan Yang, Kalsoom Jan, Wan-Ting Chen*, and Kevin C.W. Wu

Journal Info: Green Chemistry

Catalytic co-pyrolysis of LDPE and PET with HZSM-5, H-Beta, and HY: Experiments and kinetic modelling

Citation: Okonsky, S. T.,Jayarama Krishna, J.V., & Toraman, H. E. Catalytic co-pyrolysis of LDPE and PET with HZSM-5, H-Beta, and HY: Experiments and kinetic modelling.  Reaction Chemistry & Engineering, Issue 10 (2022), part of themed collection: Emerging Investigator Series.

DOI: https://doi.org/10.1039/D2RE00144F

Authors: Sean Timothy Okonsky, J.V. Jayarama Krishna, and Hilal Ezgi Toraman

Publication Info: Reaction Chemistry & Engineering

Data-level transfer learning for degradation modeling and prognosis

Citation: Fallahdizcheh, Amirhossein, and Chao Wang. “Data-level transfer learning for degradation modeling and prognosis.” Journal of Quality Technology. 2022 May 30:1-23.

Authors: Amirhossein Fallahdizcheh and Chao Wang

Journal Info: Journal of Quality Technology

A New Recycled Al-Si-Mg Alloy for Sustainable Structural Die Casting Applications

Citation: E. Cinkilic, M. Moodispaw, J. Zhang, J. Miao, A.A. Luo, “A New Recycled Al-Si-Mg Alloy for Sustainable Structural Die Casting Applications”, Metallurgical and Materials Transactions A, in press.

Authors: E. Cinkilic, M. Moodispaw, J. Zhang, J. Miao, A.A. Luo

Journal Info: Metallurgical and Materials Transactions A

Hydrogen activation and spillover on anatase TiO2-supported Ag single atom catalysts

Citation: Hu, J., Kim, E. M., Janik, M. J., & Alexopoulos, K. (2022). Hydrogen Activation and Spillover on Anatase TiO2-Supported Ag Single-Atom Catalysts. The Journal of Physical Chemistry C, https://doi.org/10.1021/acs.jpcc.2c01670

Authors: Jeremy Hu (The Pennsylvania State University, University Park, Pennsylvania (US)), Eunmi Kim (The Pennsylvania State University, University Park, Pennsylvania (US)), Michael J. Janik (The Pennsylvania State University, University Park, Pennsylvania (US)), and Konstantinos Alexopoulos  (The Pennsylvania State University, University Park, Pennsylvania (US))

Publication Info: The Journal of Physical Chemistry C

Optimized bioengineered copper recovery from electronic wastes to increase recycling and reduce environmental impact

Citation: Murali, Arun, Plummer, Matthew J., Shine, Adam E., Free, Michael L., and Sarswat, Prashant K. Optimized bioengineered copper recovery from electronic wastes to increase recycling and reduce environmental impact. Country unknown/Code not available: N. p., 2022. Web. doi:10.1016/j.hazadv.2021.100031.

Authors: Murali, Arun, Plummer, Matthew J., Shine, Adam E., Free, Michael L., and Sarswat, Prashant K.

Publication Info: Journal of Hazardous Materials Advances

DOI: 10.1016/j.hazadv.2021.100031

Recycling of Printed Papers and Usability in Flexo Printing Packaging

Citation: Sonmez, S., Sood, S., Li, K., Salam, A., Fleming III, P. D., Pekarovicova, A., & Wu, Q., (2022). “Effect of Progressive Deinking and Reprinting on Inkjet-Printed Paper”, Nordic Pulp & Paper Research Journal, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1515/npprj-2022-0076

Authors: Sonmez, S., Sood, S., Stoop, M., Fleming III, P. D., Li, K., Wu, Q., & Salam, A. (2022). “Recycling of Printed Papers and Usability in Flexo Printing Packaging”, Cellulose Chemistry and Technology, 851-860. https://doi.org/10.35812/CelluloseChemTechnol.2022.56.56

Publication Info: Cellulose Chemistry and Technology

DOI: https://doi.org/10.35812/CelluloseChemTechnol.2022.56.56

Environmental Benefits of Closing the Solar Manufacturing and Recycling Loop: Preparation of Solar Manufacturing Inventories

Citation: Robert Flores, Haoyang He, Parikhit Sinha, Garvin Heath, Paul W. Leu, and Julie M. Schoenung, “Environmental Benefits of Closing the Solar Manufacturing and Recycling Loop: Preparation of Solar Manufacturing Inventories” TMS 2022

Authors: Robert Flores, Haoyang He, Parikhit Sinha, Garvin Heath, Paul W. Leu, Julie M. Schoenung

Publication Info: REWAS 2022: Developing Tomorrow’s Technical Cycles (Volume I) (Book)

DOI: 10.1007/978-3-030-92563-5_45

ISBN: Print: 978-3-030-92562-8; Electronic: 978-3-030-92563-5

Recycled polyethylene and crumb rubber composites modified asphalt with improved aging resistance and thermal stability

Citation: Ma, Y., Wang, S., Zhou, H., Hu, W., Polaczyk, P., & Huang, B. (2022). Recycled polyethylene and crumb rubber composites modified asphalt with improved aging resistance and thermal stability. Journal of Cleaner Production, 334, 130102.​

Authors: Ma, Y., Wang, S., Zhou, H., Hu, W., Polaczyk, P., & Huang, B.

Journal Info: Journal of Cleaner Production

DOI: https://doi.org/10.1016/j.jclepro.2021.130102

Chemical Recycling of Mixed Plastics in the Electronic Waste Using Solvent-Based Processing

Citation: Anderson, Lester, Yu, Evan, & Chen, Wan-Ting. Chemical Recycling of Mixed P159Plastics in Electronic Waste Using Solvent-Based Processing. Switzerland. https://doi.org/10.3390/pr10010066

Authors: Lester Anderson (University of Massachusetts Lowell, Lowell, MA (USA)), Evan Yu (University of Massachusetts Lowell, Lowell, MA (USA)), Wan-Ting Chen (University of Massachusetts Lowell, Lowell, MA (USA))

Publication Info: Resource, Conservation, and Recycling Advances

DOI: 10.3390/pr10010066

Blending of Polyurethane Thermosets Using Dynamic Urethane Exchange

Citation: Jeremy L. Swartz, Daylan T. Sheppard, Greg Haugstad, and William R. Dichtel, “Blending Polyurethane Thermosets Using Dynamic Urethane Exchange,” Macromolecules 2021 54 (23), 11126-11133, DOI: doi/10.1021/acs.macromol.1c01910

Authors: Jeremy L. Swartz, Daylan T. Sheppard, Greg Haugstad, and William R. Dichtel

Journal Info: Macromolecules